Kategorie
HP 2530-8-PoE+ Switch 8xFE 2xCOMBO      J9780A

HP 2530-8-PoE+ Switch 8xFE 2xCOMBO J9780A...

Numer katalogowy: NUHPDSZ8P000001 Kod producenta:

HP 2530-8-PoE+ Switch 8xFE 2xCOMBO      J9780A

HP 2530-8-PoE+ Switch 8xFE 2xCOMBO J9780A

Switche

Hewlett Packard Enterprise 2530-8-PoE+ Switch 8xFE 2xCOMBO J9780A - Lifetime Warranty

Numer katalogowy: NUHPDSZ8P000001

Kod producenta: J9780A

Niedostępny

Zobacz szczegóły ›
  • Opis i dane techniczne
  • Opinie

Fizyczne

Typ obudowy

Rack

Wymiary

25.4 x 15.95 x 4.45 cm

Waga

0.98 kg

Informacje techniczne

Zarządzanie, monitorowanie, konfiguracja

- Virtual stacking — provides single IP address management for up to 16 switches
- sFlow (RFC 3176) — delivers wire-speed traffic accounting and monitoring configured by SNMP and CLI with three terminal encrypted receivers
- IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — automates device discovery protocol for easy mapping by network management applications
- Logging — provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
- Port mirroring — allows traffic to be mirrored on any port or a network analyzer to assist with diagnostics or detecting network attacks
- RMON (remote monitoring) — provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
- Find-Fix-and-Inform — finds and fixes common network problems automatically, then informs the administrator

Rozmiar tablicy adresów MAC

16000

Pobór mocy

76.7 W

Prędkość przekazywania

4.1 Mpps

Bufor pakietów

1.5 MB

Liczba portów COMBO

2

Przepustowość

5.6 Gb/s

Liczba portów SFP

Brak

VLAN

VLANs — provides support for 512 VLANs and 4,094 VLAN IDs

QoS

- Traffic prioritization (IEEE 802.1p) — allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)
- Simplified QoS configuration
    - Port-based — prioritizes traffic by specifying a port and priority level
    - VLAN-based — prioritizes traffic by specifying a VLAN and priority level

- Class of Service (CoS) — sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
- Rate limiting — sets per-port ingress enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic
- Layer 4 prioritization — enables prioritization based on TCP/UDP port numbers
- Flow control — helps deliver reliable communication during full-duplex operation

Liczba grup VLAN

512

Bezpieczeństwo

- Access control lists (ACLs) — accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models)
- Source-port filtering — allows only specified ports to communicate with each other
- RADIUS/TACACS+ — eases switch management security administration by using a password authentication server 
- Secure Sockets Layer (SSL) — encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch 
- Port security — allows access only to specified MAC addresses, which can be learned or specified by the administrator
- MAC address lockout — prevents particular configured MAC addresses from connecting to the network
- Secure shell (SSHv2; client and server) — encrypts all transmitted data for secure remote CLI access over IP networks
- Secure shell — encrypts all transmitted data for secure remote CLI access over IP netwo

Funkcje L2

- VLANs — provides support for 512 VLANs and 4,094 VLAN IDs
- Jumbo packet support — supports up to 9220-byte frame size to improve the performance of large data transfers; 8- and 24-port Fast Ethernet models automatically support up to 2000-byte frames with no configuration needed
- 16K MAC address table — provides access to many Layer 2 devices 
- GARP VLAN Registration Protocol — allows automatic learning and dynamic assignment of VLANs
- Per-VLAN Spanning Tree Plus (PVST+) — allows each VLAN to build a separate spanning tree to improve link bandwidth usage in network environments with multiple VLANs

Rozmiar ramki Jumbo

9 KB

Klasa przełącznika

Zarządzalny

Warstwa przełączania

L2

Architektura sieci

FastEthernet

Obsługa ramek Jumbo

Tak

Możliwość łączenia w stos

Brak danych

Wentylator

Nie

Zasilacz

Brak daych

Tryb przekazywania

Store-and-forward

Prezentacja 3D

Pozostałe

Gwarancja

24

Zastosowanie

Dom i małe biuro

Techniczne

Port konsoli

Tak

Liczba portów 10/100 Mbps

8

Liczba portów 10/100/1000 Mbps

Brak

Liczba portów 10Gb

Brak

Liczba portów PoE (PoE + PoE+)

8

Liczba portów PoE+

Brak

Liczba portów SFP+

Brak

Dodaj nowy komentarz

* pola wymagane

Zadaj pytanie

Zapytaj o produkt: HP 2530-8-PoE+ Switch 8xFE 2xCOMBO J9780A